Gallery

Engineered-Golf-transparent-6

Frank Hann @ Workstation #2

Frank Hann @ Workstation #2

Golf Pride - Certified Grip Center

KBS Certified Shaft Center

KBS Certified Shaft Center

True Temper Certified Shaft Center

True Temper Certified Shaft Center

2020 AGCP Gold Certificate of Qualification

PXG's Certified Northern Ontario Retailer

Excluding putter, PXG is in my bag. What's in yours?

PXG - What's In My Bag

AGCP Member

ICG Member

Flightscope X2 Launch Monitor

Flightscope X2 Launch Monitor

Used by many of the best in golf.

Flightscope Launch Monitor

PXG Engineered Golf

Flightscope X2 Training Session

Interested bystanders watching the start of a Flightscope clubfitting session!

Flightscope Fitting Session

Completely portable. Available for use indoor & outdoors - weather dependent.

Flightscope X2 LM - Engineered Golf

Club data from fitting session.

Flightscope fitting session data.

Flightscope training session in progress!

Indoor Golf Studio

Client Fitting Session - Flightscope data collection for irons.

Client Fitting Session - Flightscope data collection for irons.

Indoor Range @ Engineered Golf

Indoor Range @ Engineered Golf

Lefty in Hitting Bay

Lefty in Hitting Bay

Flightscope Shot Data and Trajectory Output

Flightscope Shot Data and Trajectory Output

Fligthscope Club Data Output

Fligthscope Club Data Output

Flightscope Speed/Acceleration Profile

Available for use as a second station.

Vector Launch Monitor

100% Of All Short Putts Do Not Go In!

100% Of All Short Putts Do Not Go In!

Putting Analysis Form

Putting Analysis Form

Fit for length, lie, loft, and face progression/offset. The ultimate putter fitting club.

DH Adjustable Putting Fixture.

Impact sensor adhered to the face of your putter. Records consistency of contact location.

Zenio Putter Monitor

Your sessions are compared to Pro Tour values.

Zenio Launch Monitor Summary Score Sheet

SkyPro Putting Analyzer

SkyPro Putting Analyzer

Measuring putting fundamentals at address and impact will improve your game. By practicing with confirmed good fundamentals you will cut make more putts & lower your score!

Putting Fundamentals

Putter Fitting & True Roller

Putter Fitting & True Roller

Stance check without putter establishes your initial natural putting posture. We might adjust some glaring problems but strive to fit your putter to your natural tendencies.

JT - DTL View Static Stance Check

Notice additional red dot for better face alignment at address. Cover the red dot with the shaft and your eyes and putter head are better aligned to keep the face pointed at the targert,

Janice's New Cure Putter - after full putter fitting

Custom Logo Available on Cure Putters

Can bend suitable woods, hybrids, irons/wedges AND putters. Very versatile and very accurate.

MR3 True Blue Loft & Lie Bending Gauge

For differing applications we need many different kinds of bending bars. One size does not fit all without damaging something!

Multiple Bending Bars

Clubmaking Tools & Instruments

Clubmaking Tools & Instruments

Very stable surface is required to precisely measure length, swingweight, MOI matching, frequency matching, deflection load testing of shafts, and FLOing of shafts.

Shaft & Club Measuring Station

Deflection Machine

Deflection Machine

Close-Up Nuefinder NF4.1 Deflection Machine

Close-Up Nuefinder NF4.1 Deflection Machine

Hydraulic Shaft Puller

Hydraulic Shaft Puller

Various methods and lots of experience is required to pull adjustable shaft connectors without damaging either the connector or the shaft. Come see us for this service.

Pulling Adjustable Shaft Connnectors

Loft & Lie Gauge

Loft & Lie Gauge

Measuring Loft

Measuring Loft

PXG Engineered Golf

Loft & Lie Gauge, HTS gauge, protractors and hosel diameter gauges.

For butt and tip trimming. Multiple shafts per cut.

Dustless Multiple Shaft Cutting Saw

For bore through shaft tip preparation

Band Saw

Pneumatic gripping station in foreground, drill press and shaft extractor in background. Fully equipped and experience like a Tour Van. Your clubs get the same treatment as the tour pro's when you utilize Engineered Golf's services.

Workstation #4 - Digitally Measuring Shaft Torque Resistance

Gripping station with perfect face alignment jig. Grips are properly aligned and often immediately usable to play golf.

Pneumatic Gripping Station & Digital Torque Resistance Gauge

We never ream with a hand drill. Too much chance for severe damage of club's hosel.

Hosel Reamer fixture and drill press.

Various nozzles are required for the many different applications encountered. Just an example of our very thorough approach to club making and repairs.

Various Grip Installation Nozzles

100% accuracy of grip alignment to the putter face. Reduces aiming problems.

Laser Alignment Fixture on Putter Grip

Jig with grip mounted laser aligned with the face of the putter. You will not see this at your Run-of-the-Mill golf operation.

Laser Alignment Board for Putter Grips

Digital Swing Weight Scale

Digital Swing Weight Scale

Dynamically match your golf clubs. This is a big step beyond statically matching using the swingweight method.

MOI Speed Match Machine

Digital swingweight scale on the right side of picture. (Black colour)

Length, MOI, SW & Deflection Test Station

Frequency matching machine in foreground.

Deflection Load Analysis by Neufinder NF4.1

Adjustable hosels for multi-compound shafted putters can be properly adjusted without damage to the shaft. They are invaluable to get the shaft projection just right. The adjustment will not have the shaft leaning incorrectly nor improperly soled. Improper soling will adversely affect aiming the face. We can also minutely adjust the face balance/toe hang of the putter using these hosel adaptors. We even can achieve the highly desirable toe-up postion which makes for the most stable clubhead during the putter stroke!

Adustable Putter Hosels & Bending Fixture

Properly soled club is now accurately measured for overall length.

Accumade True Length Ruler

Frequency machine's machines clamping fixture modified for exact torque to establish consistent & accurate clamping pressure.

Auditor Frequency Machine

Exact;ly measure the bounce angle on all irons. Critical for sand wedges to match the sand conditions on your golf course.

Mitchell Bounce Gauge

Enables on site gripping at the range or golf course.

Portable Shaft Clamp

For difficult bends to adjust loft & lie on compound bend putter shafts.

Putter Shaft Bending Fixture

Ferrule Depth Setting Fixture

Ferrule Depth Setting Fixture

PXG Gen2 Iron Demo Heads

PXG Gen2 Iron Demo Heads

PCG Gen2 Demo Heads

PCG Gen2 Demo Heads

Fitting Irons

Fitting Irons

Sterling Single Length Iron Heads

Sterling Single Length Iron Heads

Pinhawk SL heads

Pinhawk SL heads

PXG Fitting Clubs - GEN1 irons

PXG Fitting Clubs - GEN1 irons

Fitting Woods

Fitting Woods

And Lots More Fitting Woods

And Lots More Fitting Woods

PXG Woods - Fitting System

PXG Woods - Fitting System

Modifying Wedge Sole Gind

Modifying Wedge Sole Gind

Refurbish Iron - Remove Knicks

Refurbish Iron - Remove Knicks

Customization of wedge grinds with the Multi-Tool Belt Grinder

Multi-Tool Grinding Station - Custom Wedge Grinds

Multi-Tool Belt Grinder - sole & bounce adjustment

Multi-Tool Belt Grinder - sole & bounce adjustment

Grinding Buffing Machine

Grinding Buffing Machine

Removed major nicks and scratches from sole.

Reclaimed SW head from garbage heap.

View of back of club.

Reclaimed SW head from garbage heap.

View of refinished top line.

Reclaimed SW head from garbage heap.

View of refinished toe of SW.

Reclaimed SW head from garbage heap.

Sole View Before Refinishing

Sole View Before Refinishing

Refinishing includes gun-metal bluing treatment.

Refinished Scotty Cameron Putter - sole view

Before Refinishing

Before Refinishing

Refinishing includes matching original painting and gun metal bluing treatment/finish.

Refinished Scotty Cameron Putter - view of cavity back area.

Before Refinishing

Before Refinishing

Before Refinishing

Before Refinishing

After Refinishing

After Refinishing

After Refinishing

After Refinishing

Spot Refinish Crown

Spot Refinish Crown

Gentle Touch Up of PVD Face

Gentle Touch Up of PVD Face

Light Buff Polish Sole

Light Buff Polish Sole

Polish Toe - Save Decal

Polish Toe - Save Decal

Measuring Shaft For Assembly Length

Measuring Shaft For Assembly Length

Tip Trimming Golf Shaft

Tip Trimming Golf Shaft

Various High End Golf Shafts

Various High End Golf Shafts

Now you can see how torque can be resisted!

Tip View of Shaft Lamination

Almost a hole-in-one!

Almost a hole-in-one!

Opening Day 2018 #3 Green NBG&CC View Back To The Tee

Opening Day 2018 #3 Green NBG&CC View Back To The Tee

#8 Green NBG&CC Facing Back to Fwy.

#8 Green NBG&CC Facing Back to Fwy.

Approach to 10 Green

Approach to 10 Green

Cutting 9 Green View From Back.

Cutting 9 Green View From Back.

#6 Greenside Drainage Repair

#6 Greenside Drainage Repair

First warm day of the year - May 24 2018

#6 Green NBG&CC

Back of #10 Green NBG&CC

Back of #10 Green NBG&CC

Dawn Breaking NBG&CC May 2017

Dawn Breaking NBG&CC May 2017

The very last day the old tees were played on the Par 3 #2 hole at NBG&CC before they were fully remodeled and reconstructed. The new tees are terrific - lots of space and added distance to all the tees. An additional back tee was added to really challeng the shot into a green with a forced carry over the front pond.

#2 Par 3 Tees NBG&CC Just Before Reconstruction

Reconstuction of #2 Green NBG&CC

Reconstuction of #2 Green NBG&CC

Cutting #2 Green NBG&CC

Cutting #2 Green NBG&CC

#8 Green Viewed From LH Bunker

#8 Green Viewed From LH Bunker

Looking Back To Tee #9 NBG&CC

Looking Back To Tee #9 NBG&CC

#3 @ NBG&CC From In Front Of Tee

#3 @ NBG&CC From In Front Of Tee

This picture was taken just after a heavy thunderstorm and the course was very wet.

#8 Green NBG&CC Right Side Looking Into Fwy.

Grounds crew had to hurry to complete the top dressing on the chipping green before the heavy thunderstorm arrived!

Top Dressing Chipping Green NBG&CC

Early September #3 Gold Tee NBG&CC

Early September #3 Gold Tee NBG&CC

The fall colours are starting to fade. Season is going to close soon.

Early October #3 Gold Tee NBG&CC

Pretty isn't it!

NBGCC Hole #8

Pretty fall colours in view looking from #3 green northwards toward #18 green and the clubhouse.

#3 Green NBG&CC

Nice fall colours looking back to the difficult second shot landing area on the 18th fairway. The green is small and tricky too!

#18 Green NBG&CC

Dawn #14 Fwy. NBG&CC

Dawn #14 Fwy. NBG&CC

Dawn breaking on a cold mid-October day @ NBGCC.

Dawn Breaking #5 Senior Tee NBG&CC

Dawn & Green's Crew #3 Green NBG&CC

Dawn & Green's Crew #3 Green NBG&CC

Looking off to the north-east and viewing the 8th fairway and #8 green in the distance.

Back of #7 Green NBG&CC

Early Snow Closed The Course For The Year #3 NBG&CC

Early Snow Closed The Course For The Year #3 NBG&CC

Hard to believe that Nov 7 2017 the ponds had fully frozen. We had an early closing that year - Oct 25th!

Winter Comes Fast at NBGCC

flightscopelesson-hero-960x346

Ready to find out more?

Drop us a line today!

Top